Advanced Industrial Monofilament Extrusion Line
This configurable industrial monofilament extrusion line is designed for technical filament production using PA6/PA66, PET, PP or PE, subject to the selected screw, die and downstream arrangement. Its reference configuration includes drawing and heat-setting stages, a 40–70 mm screw range and a nominal 20–80 kg/h output range. Actual production capacity and filament consistency depend on polymer grade, finished diameter, drawing ratio, heating and winding requirements.
Typical projects: technical brush filament, fine industrial yarn and other application-specific monofilaments. For accurate line selection, share the resin grade, filament diameter or denier, required output, spool format and available factory space.
Small-Capacity Monofilament Extruder: Procurement Notes
This reference 20–80 kg/h monofilament making machine family can be evaluated for technical yarn and fine filament applications, subject to polymer, diameter and configuration. The reference output is not the actual throughput guaranteed for each product.
- Provide PA6 / PA66, PET, PP or PE resin grade and moisture condition.
- Specify filament diameter or denier, tensile properties, number of ends and package size.
- Confirm cooling / drawing requirements, power supply, line footprint and collection or winding format.
For larger-volume production compare the general industrial monofilament line. Request a configuration and quotation.
Technical Data
| Dia of Screw | Ø40mm – 70mm | ||
|---|---|---|---|
| Raw Material | PET, PA, PP, PE | Hot Water Tank Length | 3500mm |
| Capacity | 20-80 KG/H | Hot Air Oven Length | 4000mm – 5000mm |
| Ratio of L/D | 25 – 30 : 1 | Take-off Unit | 4 – 5 Units |
| Screw Material | SACM64 | Winder Device | 2 – 132 Spindles |
| Driving Motot of Lines | 11-30KW | Electric Control System | 4 Standard GGD Electric Cabinet |
| Struction of Die | Oil Heating ( Optional: Single or Double Die ) | Total Installed Capacity | 320 – 350 KW |
| Holes of Spinneret | 2 – 20 Holes | Total Dimensions ( L/W/H ) | 48m – 56m * 2m * 2.5m |
Drive-system engineering note: Screw speed, motor power and transmitted torque should be evaluated together when configuring an extrusion line. See our technical guide to the motor, gearbox and screw-speed relationship in extrusion equipment.
