General Industrial Monofilament Extrusion Line
Our general industrial monofilament line is configured around the finished filament, rather than a single fixed machine model. Depending on the resin and end use, the reference system can be specified for PET, PA, PP, PE or PBT, with drawing, heat setting, take-off and winding equipment selected together. The existing reference range lists 50–120 mm extruder screws and nominal production capacity of 50–250 kg/h; these are configuration ranges, not guaranteed output for every polymer or filament size.
Selection criteria: resin grade and moisture requirements, target diameter or denier, number of filament ends, required tenacity or elongation, final winding format, utilities and available floor space. Send a sample or existing production specification for a project-specific proposal.
Industrial Monofilament Making Machine: Buyer RFQ Guide
This reference 50–250 kg/h industrial monofilament extrusion line covers configurable PET, PA, PP, PE and PBT applications. Selection should be based on verified filament strength, profile, resin behavior and line speed—not capacity alone.
- Share target filament diameter / denier, number of ends, polymer grade, tensile strength and elongation.
- Define dryer, quench bath, drawing ovens, heat setting, take-off units and winder / beam package needs.
- Specify product samples, available length and width, utilities, safety requirements, documentation and after-sales scope.
Related applications: PET monofilament, brush bristles and nylon fishing line. Request a tailored production-line quotation.
Technical Data
| Dia of Screw | Ø50mm – 120mm | ||
|---|---|---|---|
| Raw Material | PET, PA, PP, PE, PBT | Hot Water Tank Length | 3000mm – 6000mm |
| Capacity | 50-250 KG/H | Hot Air Oven Length | 4000mm – 6000mm |
| Ratio of L/D | 25 – 30 : 1 | Take-off Unit | 3 – 4 Units |
| Screw Material | 38CrMoALA | Winder Device | 2 – 324 Spindles |
| Driving Motot of Lines | 11-90KW | Electric Control System | 2 – 4 Standard GGD Electric Cabinet |
| Struction of Die | Oil Heating | Total Installed Capacity | 180 – 350 KW |
| Holes of Spinneret | 1 – 312 Holes | Total Dimensions ( L/W/H ) | 42m – 52m * 2.8m * 2.3m |
Extrusion drive note: Continuous-duty reliability depends on correct screw speed, output torque, service factor and thermal capacity. LeapMono treats the reducer as part of the extrusion system; where a purpose-designed unit is required, see extruder gearbox engineering and our guide to motor, gearbox and screw-speed selection.
